-
ProductsThe company specializes in the production of low-speed high-torque cycloid hydraulic motors, BZZ full hydraulic steering gear, FK combined safety valve block.
-
About UsHebei Xuke Hydraulic Machinery Co., Ltd. is located in the east of Ningjin City, Hebei Province, close to Qingyin Expressway and 308 National Highway, 50 kilometers away from 106 National Highway and Beijing-Kowloon Railway (Hengshui) in the east, 50 kilometers away from Beijing-Zhuhai Expressway and Beijing-Guangzhou Railway in the west, and 80 kilometers away from the provincial capital Shijiazhuang, the traffic is very convenient.
-
NewsWe have a modern workshop, reliable equipment, advanced production technology, committed to producing high-quality industrial products for customers. We rely on rich production experience to provide you with high-quality products and services.
Maintenance Procedures for Hydraulic Motors
The specific situation depends on the model and condition of the motor. The following steps are more general:
Safety First: Before starting work, be sure to make sure all safety measures are in place. For example, make sure that the pressure of the hydraulic system is completely released and the power supply is disconnected to avoid any accidents.
Look at what's wrong: first check the motor carefully to see if there is any obvious damage, such as oil leakage, wrong sound and so on.
Take it apart: Remove the motor from the system. This step must be careful, it is best to mark the removed parts in order, so that they can be put back later.
Cleaning and inspection: Clean the removed parts, and then check for wear or damage. Special attention should be paid to the sealing ring and bearing.
Replace the bad parts: If there are broken or worn parts, they must be replaced with new ones. Try to use original or equivalent quality replacement parts.
Put it back: Put it back in reverse according to the order of disassembly. Make sure that each part is installed in the right position.
Try: After installation, you have to try to see if the motor can work properly. Check the pressure and flow of the hydraulic system to see if it is normal.
Record it: Finally, record the maintenance work you have done, and it will be convenient to check it later.
Repairing hydraulic motors may require some professional knowledge and skills. If you are not sure how to operate them, it is also a good choice to find professional help. Safety is the most important thing!
Key words:
Previous Page
Previous Page:
Recommended News
Specific features of hydraulic motors
2024-03-12
Maintenance Procedures for Hydraulic Motors
2024-03-12
Share
Add WeChat
Add WeChat
Add WeChat
Address: Hebei Ningjin Mainland High-tech Development Zone
E-mail:
Fax:
Main Products
Online Message